Jumping Castle Instructions

IMPORTANT

Children must not be allowed near the motor.

 

If an electrical extension is used it must  be a triple wired ,  earthed cord

 

Do not cover motor with bag or tight material – it needs air

 

Do not leave motor in rain/water – it’s an electrical appliance

 

Do not switch the motor on and off

 

Castle should be at least 1 meter away from walls or objects that can damage the castle – PS clients pay for damages

 

No pets, shoes, sharp objects streamers or food allowed on the castle

No adults allowed on the jumping castles – it will damage as it is not made for above 80 kg.

 

Adults are only allowed on slip slides

 

The air pipe feeds the air to the castle.

 

It needs to be securely attached to the motor so air does not escape

 

The pipe must not be bend or twisted - this will restrict airflow to the castle.


 

Setting up the castle

Put the castle where you intend to use it

 

Roll the castle out of the bag and look for the air pipe (long PVC pipe, at the back or on the side of the castle)

 

Attach the motor to the air pipe and fasten tight.  The motor must be upright - standing on its “leg”

 

Attach extension to motor – must be a tripled wired,  earthed cord

 

Plug extension directly into the power source and switch on electricity

 

The motor needs to run continuously for the castle to stay inflated.

 

Folding the castle

Remove motor from the castle.

 

Straighten the air pipe and hold so that the air can escape (tip: let someone walk on the castle and the air will escape faster

 

Most castles with a pond have a short air pipe underneath the pond.  Open this air pipe as well

 

Fold all loose parts to the inside

 

Fold castle in such a way that it ends up narrow and long. (same width as the bag)

 

Put bag underneath castle on the one side and roll the castle tightly towards the bag.

 

Once inside the bag close with the attached ropes.

Troubleshooting Motor

Electricity keep on tripping when motor is switched on.

 

Motor starts but cut out

 

Do the following to eliminate possible causes/solve the problem:

Take motor and plug directly into power source (no extension or other plugs) - if still problem

 

Take motor to another power source and plug in

 

Plug motor into power source – ensure that no other appliances use the same plug/line. 

 

If you do use an extension ensure that the extension is a tripled wired,  earthed cord, not longer than 15m

 

Jumping Castle

Jumping castle not stiff:

Check that the air pipe is attached tight to the motor – no air escaping

 

Check that the pipe underneath the pond is closed properly

 

Ensure that air pipe is straight with no obstructions

 

It is normal that bubbles and air escape  from the seams

 

Small holes is not a problem.  If you can put 3 fingers in a hole please phone

CONTACT US

377 7th road, Bredell, Kempton Park, 1619

082 418 3555

Thanks for submitting!